Xclusive Tuning 2010-2012 Genesis Coupe 2T STAGE 1

 

Stage 1
Tuning is a “bolt on” or single modification that requires no other work to the car or engine. You can consider a stage 1 modification to be a remap/flash of a factory spec vehicle.

CAN ADD POPS AT NO CHARGE

We offer 3 ways to accommodate your needs for Tuning.Please select these options on the dropdown menu.

1) Offer local tuning in House in Milton,Ontario.Which means no downtime and tuned on the spot by appointment only.

Payment option is ONLY  by email money transfer.Credit card or PAYPAL will NOT be accepted.

2) Sending in your ECU by mail

3) Tool Rental program with a deposit of $600 CAD which is then refunded once we receive the cable and software.The deposit would have to be paid by (email money transfer ONLY) and then refunded in the same format once it has been returned in our possession.

Payment option is ONLY  by email money transfer.Credit card or PAYPAL will NOT be accepted.

 

All you need on your end is a laptop with Windows operating system. Once you receive the cable and software our tuner will be in contact with you and will guide you through the process. Typically only takes around 30 minutes.

 

Enhanced throttle response

Approx gains are between 30-35HP and 50TQ

Example of Stage1: stock or just intake.

Requires you to send in your ECU to us and then once received please allow  2-3 Business days to be shipped back to you

MUST USE MINIMUM 91 octane

PLEASE NOTE: An upgraded Blow off valve ,Oil catch Can and upgraded 1 step colder plugs is recommended.(NGK 2309)

Disclaimer 

UNIQ Performance assumes no responsibility for any damage too the vehicle.

Price Includes Shipping back to the customers door ONLY.Price does NOT include to ship to us and is customers responsibility

BENEFITS OF ECU REMAPPING/PROGRAMMING

ECU programming will not only improve the engines power and torque figures it will also sharpen the throttle response and widen the power-band. This will make the power delivery a lot more linear. Frequently, the vehicles power output is restricted by the manufacturer, the million dollar question is why? As a driving enthusiast, you do not need or want such restrictions placed upon your vehicles. With a ECU remap from Xclusive Tuning you can unleash the hidden power and torque locked away within your engine management system.

ECU REMAPPING BENEFITS FOR TURBOCHARGED PETROL ENGINES

Turbocharged petrol engines have always been regarded as the sports flagship engine for good reason. They boast far higher power & torque figures than a non-turbocharged power-plant with similar displacement and are usually fitted to the manufacturer’s flagship models. They are also ideal candidates for programming as the ECU also controls the wastegate (turbo boost pressure control).

After your ECU upgrade to your turbocharged petrol engine, you will enjoy:

• Increased Torque

• Increased Horsepower

• Enhanced Throttle Response

• Higher Boost Levels

• Smoother power delivery

• Optimized CAM adjustments

• Optimized throttle to minimize that annoying rev hang

• Optimized Wastegate to minimize boost lag

• Better Fuel Economy

​

​

ECU REMAPPING BENEFITS FOR NON-TURBOCHARGED PETROL ENGINES

The normally aspirated petrol engine, whilst not being the easiest of engines to tune, can still benefit from a 10-15% power increase with added torque by careful reprogramming of various engine parameters within the map. Parameters such as the fuel and ignition curves can be fine tuned to give better power & torque output. On some engines the camshaft timing can also be tuned within the map, giving additional improvements. In many cases, ‘after market’ tuning items such as free flowing exhausts, high flow air filters and re-profiled camshafts can only be fully utilised by the engine once the necessary adjustments have been made within the ECU. Careful recalibration of the correct maps can unlock the potential of your new engine parts. Further power gains may also be available when a higher octane fuel is used, allowing for more ignition timing

After your ECU upgrade to your turbocharged petrol engine, you will enjoy:

• Increased Torque

• Increased Horsepower

• Enhanced Throttle Response

• Smoother power delivery

• Optimized CAM adjustments

• Optimized throttle to minimize that annoying rev hang

• Optimized Wastegate to minimize boost lag

• Better Fuel Economy

​

WHAT DO YOU ACTUALLY MODIFY IN MY VEHICLE?

We do not change any hardware in your vehicle, we just modify the operating parameters in the ECU’s program or ‘map’. In many cases the map stored on the ECU’s processor (not limited to) and can be accessed via the on-board diagnostics port (OBD) in the vehicle, normally found under the dashboard. In some newer models the ECU will have to be removed from the vehicle and the casing opened, our technicians will then use specialist tools to read the original map straight from the processing chip.

The Xclusive technician will then upload (read) the original map and will adjust the parameters (tuning) to maximise the performance, fuel economy or a clever blend of both. Depending on the vehicle and ECU type the chip tuning process can take under an hour or over night. If at any time you wish to return your vehicles ECU to its original default settings, this can be done easily and free of charge (shipping charges may apply) as we always keep a copy of the original software as a backup

Tuning is our Passion

“Custom tuning” for basic bolt on mods, NOT REQUIRED! When you understand how torque based ecu work you will see why. The ECU is designed to hit and maintain torque request from the driver. Torque request is a fancy way of saying mash the throttle. IF you have well designed canned/base tune for torque request ECU the programming will adjust to your bolt on mods. Key words “well designed”. Anyone notice our so called Stage1 and Stage2 files are the same price? Anyone ask why? What is really happening when you go from a Stage1 to a Stage2? You are freeing up back pressure in the exhaust. For those of you who have our Stage1 then upgraded the exhaust they can tell you why. I set the Ecu to adapt to the changes in air flow (this includes air temps, how we do it is the secret) when you remove the cat or go to a high flow cat. Disconnected the ECU for about an hour or over night, then reconnect, start the car, let idle for 10 mins then go for a drive. EVERY customer that has done this has notices the gains. What witch craft is going on here???!!! Honest answer none! it is simply how a well designed canned/base tune will adjust torque and we don’t charge extra for it, WHY??? because we are not doing anything to charge you more, it is already set up for it. So if you are being told custom tuning for basic bolt on mods is required ask a few simple questions. What power/torque more will get over a canned/base tune? How much more will a custom tune cost, include dyno time? Now weigh the cost difference to the power gain and judge for your self. Another “red flag” if you are at the same boost level and you are getting signigfigant gains ask why. During testing we set up our base/canned tune to where we were comfortable (safe) then I “custom tuned” the vehicle (intake, full turboback) guess the power increase, anyone? After 5 pulls we gained a massive 3tq and the plotted graph was exactly the same, no real shift in the torque curves. If you are gaining big numbers from a “custom tune” then how well is the base/canned tune set up? Only mods that require custom tuning is larger turbo, cams and injectors, there are a few others but those are the main ones. Bottom line if you are being told some crap behind the seen TALK TO US!!! I will be open and honest like I have been in this post.